Jasvid Hood Cleaning is a necessary and important part of ensuring a kitchen is safe to work in. It includes cleaning the metal canopy that is mounted above your cooking appliances that vents out, filters or captures cooking grease. It is usually coated with grease and dirt after use and can create a fire hazard if not cleaned regularly.

NFPA 96 guidelines state that the majority of commercial kitchens should have their hoods cleaned on a quarterly basis. For high volume cooking, such as 24-hour or charbroiling operations, this should occur monthly. For lower volume cooking, such as schools and churches, a semi-annual cleaning may be sufficient.

The Link Between Hood Cleaning and Employee Health

Professional hood cleaners are trained to follow strict guidelines when cleaning your exhaust system and are familiar with all the nooks and crannies in your kitchen exhaust ducting. They use a combination of hot power washing and hand scraping to clean your entire kitchen exhaust system from the rooftop fan down to the cooktop.

They start by taping over all electrical outlets and covering anything in the immediate vicinity of your hood with sheets or plastic to protect them from grease spray back and chemical washing during the process. Next, they remove the filters for separate cleaning and create a funnel system to channel grease water into large trash cans for proper disposal.

Next, a technician uses a brush or vacuum to clear out any blockages in the ductwork. Lastly, they inspect the system for any damage or wear that may need to be repaired before reassembling it. Most hood cleaning companies also polish the hoods to make them easier to clean in the future and apply a certification sticker that shows fire inspectors, health department officials and your insurance agent that your kitchen is up to code.

Jasvid Hood Cleaning
4510 Saddlebrook Dr, Carrollton, TX 75010, United States
(469) 235-4728
…

Spray foam insulation is a great solution for homes with varying energy requirements and climates. It is also a highly effective way to reduce noise and enhance indoor air quality. However, there are several things to keep in mind when evaluating spray foam options for your home. First and foremost, make sure that the spray foam you’re purchasing has been tested for density. This step is important for ensuring that you have the correct amount of spray foam and avoiding waste.

The Top Mistakes to Avoid When Installing Spray Foam Insulation

Foam insulation creates a sealed building envelope, blocking the movement of heat from exterior to interior during heating months and vice versa. It also blocks convective airflow, which is the main cause of hot and cold spots in a home.

While spray foam is effective in blocking air movement, it can also entrap moisture. This is a major concern for homeowners, especially in humid climates. If left unchecked, moisture can lead to mold development and a decrease in indoor air quality. These issues can often go undetected for some time, and remediation costs can be significant.

To mitigate these risks, an enhanced home ventilation system such as an ERV or HRV should be installed in conjunction with spray foam insulation. This helps to remove moisture and pollutants from the air, preventing mold development and reducing indoor air quality issues that can be costly to address down the road.

Foam Expert Group
130 Industry St #39 North York ON  M6M 5G3
647-671-3950
…

As one of the most important preventative maintenance treatments for any commercial or residential parking lot, the use of asphalt sealcoating is an essential investment in your pavement’s longevity. A properly performed and regularly scheduled asphalt sealcoating treatment will extend the life of your pavement and create a more appealing surface for motorists.

Aside from the aesthetic benefits, asphalt seal coating preserves asphalt surfaces against water penetration and other environmental conditions that can cause the material to deteriorate over time. Sealcoating also helps to fill minor cracks and repair potholes, which protects the asphalt from more expensive repairs and potential structural failure in the future.

Asphalt Sealing Services: Protect and Extend the Life of Your Pavement

Asphalt sealing services is a petrochemical, which means it is a byproduct of refined petroleum products such as gasoline, motor oil and other automotive fluids. These petrochemicals, when they drip onto asphalt surfaces, are naturally compelled to integrate with the material on a molecular level. This compulsion weakens the asphalt and causes it to break down over time. Asphalt seal coating protects against the damaging effects of petrochemicals and chemicals on your pavement.

Aside from the obvious physical damage, leaking petrochemicals can also result in costly structural problems with your pavement structure. The most common and serious of these structural problems is the formation of large cracks that are often filled with hot-poured rubber or other non-asphalt materials. Asphalt sealcoating is the best solution to prevent these types of problems from occurring, as it will help to preserve the existing pavement structure and create a more attractive surface for motorists.…

Insulation is one of the most important upgrades you can make to improve your home’s energy efficiency. Insulating your attic helps to stop warm air from escaping the house in the winter and cool air from entering during the summer, significantly decreasing your energy bills and making your home more comfortable.

In addition to keeping you warmer in the winter and cooler in the summer, attic insulation can help to reduce ice dams in the winter, as well as mitigate moisture levels throughout your home, all of which lead to a reduction in your energy bills. In fact, some homeowners experience as much as 50% savings on their utility bills after insulating their attic.

Why Olympia Homes Benefit from Professional Attic Insulation Installation

A wide variety of attic Insulation Contractor is available, each with different R-values – the higher the R-value, the better it will resist heat flow. The type of insulation you choose will depend on the climate in your area and the level of comfort you want to achieve.

Cellulose – Made from recycled paper, cellulose insulation has an R-value of 3.2 to 3.7 per inch and is considered eco-friendly. It can however be flammable, so it must be treated with fire-retardant additives like ammonium sulfate or borate.

Spray Foam Insulation – Spray foam insulation is made from polystyrene, polyisocyanurate, or polyurethane and is installed in panels or boards. It has a high R-value and is long-lasting and durable. It also has the benefit of being moisture resistant, protecting your attic from mildew and mold.

316 Insulation of Olympia
2511 Columbia St SW Olympia WA 98501
253-332-7606
…

In this article, we explore spray foam insulation, a premium product that offers several benefits to homeowners and builders. It’s an airtight insulation that seals the building envelope, stops air leakage and improves indoor climate control and energy efficiency. It also offers sound dampening and structural reinforcement.

It’s important to note that spray foam insulation is a permanent fixture within your home, and you can’t just “roll it out” like fiberglass batt insulation. As such, you must choose a professional installation company who can help ensure your installation is completed correctly and that the product performs to the highest standards.

Why Green Earth Spray Foam is Your Top Choice for Eco-Friendly Insulation

Green Earth Spray Foam has recently updated its advice on the use of alternative thermal products, including spray foam. It now recommends surveyors check with mortgage and insurance providers before installing insulation such as this to ensure they comply with their policies.

When applying spray insulation, it’s recommended that occupants of the home vacate the property during the application process to avoid inhaling the volatile organic compounds (VOC) that are released as the foam expands and cures. It’s best to hire a professional technician who can utilize a boom lift, if necessary, for harder-to-reach areas. You may need to add a small amount of water to the insulating foam to help it expand in hard-to-reach spaces. It’s also essential to wear masks or respirators during this time, and be sure to thoroughly clean your breathing apparatus between uses. This will prevent the foam from accumulating in the straw and making it more difficult to reach hard-to-reach spaces again in the future.

Green Earth Spray Foam
1891 Prospect Church Rd Lawrenceville, GA 30043
678-792-0402
…